Nice Robus 600 operator kit for sliding gates, up to 600 kg, 24 V, model 2024, with 5 m toothed rack

This kit combines the Nice Robus 600 (model 2024) operator with 5 m of toothed rack. The operator is designed for cantilever and tracked sliding gates up to 600 kg and leaf length up to 8 m. For normal operation we recommend gates up to 400 kg. The MCU1 control unit has a built-in bidirectional receiver and a BUS T4 connector.

What is in the kit

• Robus 600 operator – with the MCU1 control unit and a status LED that shows normal operation in green and recommended maintenance or a fault in red.
• Photocells – a pair of Nice EPMB BlueBus photocells.
• Flashing light – Nice ELDC LED warning light.
• Transmitters – two Nice MYGO4 hand transmitters; the receiver stores up to 100 transmitters.
• Toothed rack – 5 pieces of 1 m plastic-coated rack with steel core, module 4.

Before you choose

• Rack length – the rack must run along the entire travel of the gate. For a longer gate add more pieces.
• Duty cycle – 40 cycles per hour with a gate up to 4 m, 20 cycles at 8 m, at most 100 cycles per day.
• Power failure – key release or the Nice PS124 backup battery.

For a lighter gate the Robus 400 with 4 m rack is enough. In the Košice and Prešov regions we install the operator; more on the page Gate operators with installation.