Umakov bottom stop for tracked gates, with plate, galvanised, 100 × 80 mm

The bottom stop defines the end position of a sliding gate running on a track. It is mounted on the ground where the gate should stop. The gate hits the rubber buffer, which cushions the impact and protects both the frame and the operator.

Dimensions

• Plate – 100 × 80 mm, 4 mounting holes Ø 11 mm at 76 × 56 mm centres.
• Height – 91 mm; the rubber buffer has a diameter of 35 mm.
• Material – steel with zinc finish, rubber buffer.

Things to consider during installation

Before installation, compare the buffer height with the gate frame so that the gate hits the rubber, not the metal. Bolt the stop to a solid concrete base. On a gate with an operator, the stop serves as a fixed stop; also set the end position in the operator.

Alternatives

The taller stop with a 100 × 100 mm plate is 130 mm high. Another option is the RollingCenter floor end stop. The full range can be found in the Track stops category.