Came BXV06AGS operator kit for sliding gates, up to 600 kg, 24 V

Came BXV06AGS is an operator for sliding gates weighing up to 600 kg and up to 18 m long. It is the second generation of BXV operators with an improved emergency release. The 24 V DC motor with encoder copes with frequent opening and detects an obstacle in the gate's path. The control board is positioned horizontally, which makes wiring and setup easier. In the event of a fault it can be replaced by the Came ZN7 control board.

Expansions

• Came CONNECT – with the Came GSM Gateway module you control the operator via the internet.
• R700 and R800 cards – for direct connection of a proximity reader (R700) or a coded keypad (R800).
• Wireless accessories – with the RIO-CONN card you can connect RIO photocells and flashing lights without cables.
• Backup batteries – with the RLB additional electronics and two 12 V batteries the operator keeps working during a power failure.
• Energy saving – the RGP1 module reduces standby consumption from 5.5 W to 0.5 W.

Things to consider before choosing

• Gate weight – for a lighter gate up to 400 kg the BXV04AGS is sufficient; for a heavier one choose the BXV08AGS (up to 800 kg) or the BXV10AGS (up to 1000 kg).
• Newer version – the BXV06AGE (BXV Plus range) includes CXN BUS photocells and an RGB flashing light in the kit.
• Gate – it must be stable, move easily and have fixed end stops.
• Environment – IP44 protection rating, operation at −20 to +55 °C.

In the Košice and Prešov regions we install the operator; more on the Gate operators with installation page.