Nice Robus 500 Hi-Speed operator kit for sliding gates, up to 500 kg, 24 V

Nice Robus 500 Hi-Speed is a faster version of the Robus range for cantilever and tracked sliding gates. The gate moves at 0.44 m/s, while the standard Robus runs at 0.31 to 0.34 m/s. The manufacturer specifies gates up to 8 m and 500 kg; for normal operation we recommend up to 350 kg. The kit contains the operator with the RBA3/HS control unit, receiver, remote control and photocells.

What to bear in mind when choosing

• Duty cycle – 40 cycles per hour for gates up to 4 m, 20 cycles at 8 m, max. 100 cycles per day.
• Wiring – photocells and other accessories are connected via the BlueBUS system with 2 wires.
• Toothed rack – not included in the kit. The pinion has module 4 (18 teeth); choose the rack in the toothed racks category.
• Power failure – key release or the Nice PS124 backup battery.
• Environment – IP44 protection rating, operation at −20 to +50 °C.

Other variants

The operator alone without accessories is the Robus 500 Hi-Speed motor. If you do not need the speed and the gate is heavier, choose the Robus 600 model 2024.

We install the operator in the Košice and Prešov regions; see the Gate operators with installation page.