RollingCenter stop, small

The 50 B stop (catcher) is mounted on the post that the cantilever sliding gate reaches when closing. The bottom C-profile of the gate enters the stop, the guide centres it and the gate stops in the exact position. The end of the C-profile usually has a support wheel that runs onto the lower part of the stop in the closed position, so the front end of the gate does not hang freely.

Which profile

• C-profile – GIPI 4 RP/RPZ 70 × 60 mm, for example the RollingCenter 70 × 60 mm C-profile.
• Dimensions according to the RollingCenter catalogue – height 135 mm, front part height 85 mm, width 87 mm, depth 90 mm, plate thickness 4 mm.
• Finish – galvanised steel.

What goes with it

The RollingCenter catalogue combines it with the CA 4 RPS carriage (8 wheels Ø 50 mm) and the 41 B support wheel. These parts are also included in the cantilever gate kit up to 6 m.

Alternatives

For the 94 × 85 mm profile there is the 50 P medium stop, for the 136 × 143 mm profile the 50 G large stop. More parts can be found in the Gate stops and catchers category. We are happy to help you choose at eshop@saver.sk.