Hörmann Industrial Doors
For halls, warehouses, workshops, agricultural buildings and car parks, we supply and install Hörmann industrial sectional and roller doors in the Košice and Prešov regions. We design every door according to the opening, operation and requirements for thermal insulation and security.
- Hörmann industrial sectional doors of the 60 series with 42 and 67 mm construction depth
- Roller doors and roller grilles up to 12 × 9 m, up to 36 m wide in combination
- Hörmann operators with opening speeds of up to 1 m/s
- Design, installation and servicing by our own SAVER team
- Within 24 hourspreliminary quote
- Free surveyafter you approve the quote
- Our own teaminstallation and service without middlemen
- Over 30 yearson the market, showroom in Košice
Industrial sectional doors
A sectional door opens vertically, so the space in front of and behind the door remains free. The sections are parked under the ceiling, vertically above the opening or along the roof pitch – Hörmann offers more than 30 track types, so we can fit the door in new buildings as well as hall renovations.
SPU F42 and SPU 67 Thermo steel sectional doors
Robust doors made of polyurethane-filled steel sections for tough everyday use. SPU F42 has 42 mm sections, SPU 67 Thermo thermally broken 67 mm sections with a U-value of up to 0.51 W/(m²·K) – suitable for heated halls.
New: steel sections are also available with the Plaingrain “fine matt texture” surface in the preferred colours white RAL 9016, grey aluminium RAL 9007, white aluminium RAL 9006 and anthracite RAL 7016 – an elegant matt look with resistance to scratches and impacts.
APU and ALR doors with aluminium frames
For more daylight in the hall. APU F42 combines steel sections with glazed aluminium frames, ALR F42 consists entirely of aluminium frames and ALR F42 Vitraplan has glazing flush with the frame. Duratec plastic glazing is scratch-resistant and stays permanently clear. For heated halls the doors are also available in the thermally broken Thermo version.
Wicket and side doors
Wicket doors with an extra-flat stainless steel threshold make it easier for people to walk through and for trolleys to pass and, under certain conditions, can serve as escape doors. We supply side doors in the same design as the door.
Why Hörmann industrial doors
Quiet running with low wear
The large 510 mm track radius and optimally sized track rollers protect the door mechanics. Ball-bearing track rollers and stable section joints last more than 25,000 cycles, up to 200,000 with special equipment.
Double track rollers – only from Hörmann
Standard double track rollers on the top section ensure quiet door travel, especially when closing.
Corrosion protection
The optional glass-fibre-reinforced plastic frame foot prevents direct contact between the frame and moisture on the floor and, together with the floor seal, gives a neat finish.
Burglary protection
The standard double-sided anti-lift protection works mechanically and protects goods and machines even in a power failure. Sectional doors, wicket doors and side doors are optionally available with certified RC 2 security equipment.
Thermal insulation of 67 mm sections
Thermally broken 67 mm steel sections achieve a U-value of up to 0.51 W/(m²·K) and reduce hall heating costs.
ThermoFrame frame connection
The optional ThermoFrame connection thermally separates the frame from the masonry and, together with double lintel seals, improves thermal insulation and airtightness.
Thermally broken aluminium frames
Framed doors with aluminium profiles bring plenty of light into the hall, and the thermally broken version offers excellent thermal insulation.
Duratec glazing
Duratec plastic glazing with a coating of car headlight quality stays permanently clear and resistant to cleaning marks and scratches.
Wicket doors with a flat threshold
The extra-flat stainless steel threshold reduces the risk of tripping and makes it easier for trolleys to pass.
Spare parts and Made in Germany quality
Hörmann guarantees spare parts for doors, operators and controls for 10 years. The family company Hörmann manufactures all important parts of the door, operator and control itself.
Operators for industrial doors
We match the operator to the door size, the number of openings and the required speed.
- WA 300 S4 – a cost-effective shaft operator for doors up to 6000 × 4500 mm with lower frequency (up to 10 cycles per hour, 150 per day), smooth running with force limitation.
- WA 500 and WA 500 FU – shaft operators for frequent use. WA 500 FU with a frequency converter opens at up to 1 m/s with soft start and soft stop, and its adaptive travel monitoring signals in good time when maintenance is needed.
- ITO 500 FU – an operator developed for underground car parks with an opening speed of up to 0.5 m/s.
The WA 500, WA 500 FU and ITO 500 FU operators can be fitted with the VL1-LE advance photocell at no extra charge, which stops the door without contact if there is an obstacle. They can be operated with push buttons, BiSecur remote controls and the BlueControl app.
Roller doors and roller grilles
A simple and robust steel or aluminium construction that needs little maintenance and little space. Suitable for closing warehouses, production halls, agricultural buildings and retail premises.
- TD roller door – new from Hörmann: a cost-effective entry-level solution up to 5 × 4.5 m with optional impulse control.
- SB roller door and grille – Decotherm S steel profile up to 5000 × 4500 mm, roller grille with HG-L aluminium curtain up to 6000 × 4500 mm; both the door and the operator need little maintenance.
- DD roller door and grille – for large openings: roller door up to 12,000 × 9000 mm, roller grille up to 12,000 × 8000 mm. With the S6 package it opens at up to 1.1 m/s with soft start and soft stop.
- SSG DD combinations – by combining up to three roller doors we close openings up to 36 m wide or 9 m high, now also in wind load class 4.
- TGT roller door and grille – a solution for underground and multi-storey car parks.
All roller door curtains come as standard with wind hooks or anti-pull-out protection.
Easy installation and low maintenance
SB and TGT roller doors and grilles have standard force limitation, so for most curtains and sizes no closing edge safety device needs to be fitted to the door. Both the door and the operator need little maintenance and are economical.
Fast installation even in tight spaces
The entire door construction including brackets and guide rails is installed as a frame unit, saving time and costs. With a side room of only 165 mm, the door also fits into tight spaces.
Fast opening with the S6 package
The DD roller door with Decotherm curtain and the S6 package opens at up to 1.1 m/s with soft start and soft stop. It improves traffic flow and reduces heat loss at far lower cost than a high-speed door.
Roller grilles for underground car parks
TGT roller doors and grilles are designed specifically for underground and multi-storey car parks.
Doors for car parks and fire-rated sliding doors
For underground and multi-storey car parks we supply sectional, roller and sliding doors with quiet running and ventilation openings. To protect buildings and escape routes we offer single- and double-leaf fire-rated and smoke-tight sliding doors, optionally with integrated escape doors.
What we do for you
- assess the opening, operation and requirements for the door,
- design the door type, operator and controls,
- prepare a quotation,
- install the door, put it into operation and provide servicing.
Frequently asked questions
Which section depth should I choose – 42 or 67 mm?
42 mm sections (SPU F42) are suitable for standard halls and warehouses. Thermally broken 67 mm sections (SPU 67 Thermo) offer much better thermal insulation and we recommend them for heated halls, workshops and warehouses where you want to save heating costs.
Which operator is suitable for an industrial door?
For smaller doors with fewer openings, the cost-effective WA 300 S4 is enough. For frequent use we recommend WA 500 or the fast WA 500 FU with a frequency converter, and ITO 500 FU for underground car parks. We select the operator according to the door size and the number of cycles per day.
Can a door be built into an industrial door?
Yes. A wicket door with an extra-flat threshold can be built into the sectional door, or we can supply a side door in the same design.
Do you also offer high-speed doors?
We do not offer high-speed doors at the moment. If you need fast opening, we recommend an industrial sectional door with the WA 500 FU operator, which opens at up to 1 m/s.
Where do you install industrial doors?
Design, installation and servicing are carried out by our own team in the Košice and Prešov regions.
What SAVER customers say
Would you like a free quote?
Send us an enquiry with the opening dimensions and a description of the operation, write to saver@saver.sk or call +421 903 628 111.