Swing gate operators 90 products

Linear or articulated arm operator?

A swing gate is the solution mainly where there is no room for a sliding gate at the sides of the entrance. The type of operator depends mostly on the post the leaf hangs from:

• Linear operators (ram or screw-driven) suit narrower posts, roughly up to 10 to 20 cm. They are mounted directly between the post and the leaf.
• Articulated arm operators have a cranked arm and can handle wide concrete or stone pillars where there is no room for a linear operator.

When choosing, also consider the width and weight of the leaf, the gate infill (a solid infill catches more wind) and the distance of the hinge from the edge of the post.

One or two leaves

For a single-leaf gate, choose from the Single swing gate operators category; for a double-leaf gate, from the Double swing gate operators category. Kits for two leaves include two motors and a shared control board.

Safety and control

The control boards allow you to connect a push button, key switch, code keypad, card reader and remote control. For safety we recommend:

• photocells, which stop the gate when there is an obstacle,
• safety edges on the leaves to prevent trapping,
• a flashing light that signals gate movement.

Installation

In the Košice and Prešov regions we will install and set up the operator. We can also advise on automating an existing gate – more on the Gate operators with installation page.