Umakov bottom stop for tracked gates, with plate, galvanised, 100 × 100 mm

The bottom stop sets the end position of a sliding gate that runs on a track. It is mounted on the ground where the gate is to stop. The gate hits the rubber buffer, which cushions the impact and protects both the frame and the operator.

Dimensions

• Plate – 100 × 100 mm, 4 mounting holes at 71 × 71 mm centres.
• Height – overall height 130 mm, the centre of the rubber buffer is 126 mm above the base.
• Material – zinc-plated steel, rubber buffer, weight approx. 1 kg.

Things to consider during installation

Before installation, compare the buffer height with the gate frame so that the gate hits the rubber, not the metal. Bolt the stop to a firm concrete base. On a gate with an operator, the stop acts as a fixed stop; set the end position in the operator as well.

Alternatives

A lower stop with a 100 × 80 mm plate has a height of 91 mm. Another option is the RollingCenter floor end stop. The full range can be found in the Gate stops category.