Hörmann LineaMatic P operator kit for sliding gates, up to 500 kg, 24 V, with safety kit

This kit combines the Hörmann LineaMatic P operator with the SK LineaMatic safety kit. The operator handles sliding gates up to 8 m long and up to 2 m high. A gate on wheels may weigh up to 500 kg, a cantilever gate up to 400 kg. The duty cycle is 40 cycles per day and 10 cycles per hour.

What is in the kit

• LineaMatic P – operator with BiSecur 868 MHz receiver and hand transmitter.
• EL 301 photocell – stops and reopens the gate when the beam is interrupted. It is required for automatic closing.
• SLK signal light – the yellow 24 V LED light flashes while the gate is moving.
• Cables and fixing materials – 2 × 10 m of two-core cable.

Before installation

• Toothed rack – not included in the pack. Plastic racks for LineaMatic are Hörmann V6 with fixings at the bottom and Hörmann S6 with fixings at the top.
• Photocell – fit the transmitter and receiver so that the beam is at a height of about 75 to 100 mm.
• Gradient – the operator is not suitable for gates that run uphill or downhill.

The safety kit is also available with the LineaMatic up to 300 kg and LineaMatic H up to 800 kg operators. In the Košice and Prešov regions we install the operator; more on the page Gate operators with installation.