Hörmann VersaMatic operator kit for single-leaf gates, up to 2 m, 24 V, with safety kit

This kit combines the Hörmann VersaMatic single-leaf operator with the SK safety kit. You get an operator with articulated arm, the EL 301 through-beam photocell, the SLK 24 V signal light and screw cable connectors. The operator is for a leaf 1 to 2 m wide, up to 2 m high and weighing up to 200 kg; it is particularly suitable for deep masonry piers. The 24 V DC motor handles 20 cycles per day or 5 per hour.

Functions

• End positions – set the Closed position with the integrated stop or a stop on site; the Open position also works without a stop.
• BiSecur radio – built-in bidirectional receiver; connect the Gateway via the HCP interface.
• Safety – the operator stops at an obstacle, the photocell monitors the passage and the flashing light warns that the gate is moving.

Before installation

• Installation dimensions – the operator can be mounted in three ways. Depending on the mounting method, dimension e is −33.5 to +266.5 mm or −30 to +360 mm.
• Gate – take wind load into account for the leaf infill (EN 13241-1).

For double swing gates there is VersaMatic for 2 leaves + SK kit. In the Košice and Prešov regions we install the operator; more on the page Gate operators with installation.