Hörmann VersaMatic P operator kit for double-leaf gates, up to 6 m, 24 V

Hörmann VersaMatic P is an articulated arm operator for entrance swing gates with more difficult installation conditions. It is particularly suitable for deep masonry pillars. The kit is for a 2-leaf swing gate with leaves 1 to 3 m wide, up to 2 m high and weighing up to 300 kg.

Functions

• End positions – the Closed position is set with the integrated stop or a stop on site. The Open position can also be programmed without a stop.
• BiSecur radio – built-in bidirectional 5-channel receiver for up to 150 radio codes and an HSE 4 BS hand transmitter.
• Smart Home – a Gateway can be connected via the HCP interface.

What to bear in mind before installation

• Installation dimensions – the operator can be installed in three ways. Depending on the installation method, dimension B is at least 115, 135 or 215 mm.
• Gate – it must be easy to open by hand. Take wind load into account for the leaf infill. Gates with an incline of up to 6° need an additional fitting kit.
• Accessories – optional 24 V electric lock and HNA Outdoor emergency battery.

For leaves up to 2 m and 200 kg, the VersaMatic is sufficient; for narrow posts choose the RotaMatic P. A kit with a photocell and flashing light can be found in the Articulated arm operators category. We install the operator in the Košice and Prešov regions, see the Gate operators with installation page.