Hörmann VersaMatic operator kit for single-leaf gates, up to 2 m, 24 V

Hörmann VersaMatic is an articulated arm operator for entrance swing gates with more complex installation conditions, for example on a wide masonry pillar with the hinge set deep inside. This kit is for one leaf 1 to 2 m wide, up to 2 m high and weighing up to 200 kg. The operator handles 20 cycles per day or 5 per hour.

Functions

• End positions – you set the Closed position with the integrated stop or with a stop at the installation site. The Open position can also be programmed without a stop.
• Force limitation – the operator learns it by itself for both directions and stops if there is an obstacle.
• BiSecur radio – integrated bidirectional receiver; a Gateway can be connected via the HCP interface.

What to bear in mind before installation

• Installation dimensions – the operator can be installed in three ways. Depending on the installation method, dimension e is −33.5 to +266.5 mm or −30 to +360 mm.
• Gate – take wind load into account for the leaf infill (EN 13241-1).
• Accessories – optional electric lock and the HNA Outdoor emergency battery.

The kit with photocell and flashing light is available as VersaMatic for 1 leaf + SK kit; for double swing gates there is the VersaMatic for 2 leaves. We install the operator in the Košice and Prešov regions; see the Gate operators with installation page.