Hörmann VersaMatic operator kit for double-leaf gates, up to 4 m, 24 V

The Hörmann VersaMatic is an operator with an articulated arm for entrance swing gates with more difficult installation conditions, for example on deep masonry piers. The kit is for a 2-leaf swing gate with leaves 1 to 2 m wide, up to 2 m high and weighing up to 200 kg. The operator handles 20 cycles per day or 5 per hour.

Functions

• End positions – you set the Closed position with the integrated stop or with a stop at the installation site. The Open position can also be programmed without a stop.
• Force limit – the operator learns it automatically for both directions and stops when it meets an obstacle.
• BiSecur radio – built-in bidirectional 5-channel receiver and HSE 4 BS hand transmitter.
• Smart Home – a Gateway can be connected via the HCP interface.

Things to consider before installation

• Installation dimensions – the operator can be installed in three ways, and each pillar can be handled differently. Depending on the installation method, dimension e is −33.5 to +266.5 mm or −30 to +360 mm.
• Gate – take wind load into account for the leaf infill (EN 13241-1).
• Accessories – optionally an electric lock and the HNA Outdoor emergency battery.

For leaves up to 3 m and 300 kg choose the VersaMatic P; a kit with photocell and flashing light is available as the VersaMatic + SK kit. In the Košice and Prešov regions we install the operator, more on the Gate operators with installation page.