Nice Naked NKSL400 post-mounted operator kit for sliding gates, up to 400 kg, 24 V

Nice Naked NKSL400 is a sliding gate operator that is installed directly inside the supporting post. This means no motor is visible at the gate. It is suitable for cantilever and tracked gates up to 400 kg and 7 m long; for normal operation we recommend a weight of up to 200 kg. The duty cycle is 35 cycles per hour. It is a complete kit.

Functions

• End positions – set by mechanical limit switches with Open and Closed brackets on the toothed rack.
• Release – can be placed on any side of the post; with the KIO and KA1 accessories also from outside.
• Opposing gates – optionally, two gates moving towards each other can be automated.

What to bear in mind before installation

• Post – the internal dimension of the supporting post must be at least 140 × 140 × 3 mm.
• Power cut – release the operator with the key or buy the Nice PS124 battery, which fits inside the operator.
• Toothed rack – choose it according to the weight and design of the gate in the Toothed racks category.
• Visible operator – if you do not want the operator inside the post, choose the Nice Slight SLH400.

The replacement control board is the Nice NKA3R10. We install the operator in the Košice and Prešov regions, see the Gate operators with installation page.