Hörmann LineaMatic H operator kit for sliding gates, up to 800 kg, 24 V, with safety kit

The kit combines the most powerful Hörmann LineaMatic H operator with the SK LineaMatic safety kit. The operator is designed for large entrance gates up to 10 m long and up to 3 m high, including commercial use. A gate on wheels may weigh up to 800 kg, a cantilever gate up to 600 kg. The duty cycle is 40 cycles per day and 10 cycles per hour.

What is in the kit

• LineaMatic H – operator with ESE 868 BiSecur receiver and hand transmitter.
• EL 301 photocell – stops and reopens the gate when the beam is interrupted.
• SLK signal light – the yellow 24 V LED light flashes while the gate is moving.
• Cables and fixing materials – 2 × 10 m of two-core cable.

Before installation

• Foundation – the operator is anchored with the supplied steel plate in a frost-proof foundation of class B25 or C25 concrete. A replacement base plate can also be bought separately.
• Toothed rack – not in the pack. Plastic racks for LineaMatic are Hörmann V6 with fixings at the bottom and Hörmann S6 with fixings at the top.
• Gradient – the operator is not suitable for gates that run uphill or downhill.
• Photocell – fit the beam at a height of about 75 to 100 mm. It is required for automatic closing.

For gates up to 500 kg, LineaMatic P with safety kit is enough. In the Košice and Prešov regions we install the operator; more on the page Gate operators with installation.