Rollkit bracket for joining two BSF-M hydraulic brakes

The bracket joins two BSF-M brakes into a single unit. Use it for a heavy sliding gate or a steeper slope, when the load exceeds the 7 Nm that one brake can handle. The joined brakes can be loaded up to a maximum of 14 Nm.

When you need two brakes

Calculate the load using the formula M [Nm] = P × sin β × 0.032, where P is the gate weight in newtons (1 kg = 9.8 N) and β is the slope in degrees. If the result is more than 7 Nm and no more than 14 Nm, use two brakes with this bracket. At a higher value, the brakes will not work reliably and may be damaged.

Things to consider during installation

• Position – mount the brakes as close to the operator as possible.
• Gap – leave 1 to 2 mm between the rack and the pinion.
• Change of direction – the braking direction is changed by turning the pinion according to the brake instructions.

The brake itself can be found here: BSF-M hydraulic brake. Sliding gate operators are in the sliding gate operators category. Send questions to eshop@saver.sk.