Came SELT1BDG keypad, surface-mounted, wired
- Came surface-mounted wired keypad with 12 buttons and blue backlighting
- Code up to 8 digits, protection rating IP54, powered from the Came control board
- Must be connected to an R800 / R800 V2 card, S0002M / S0002P, S0001 / S0002 / S0004 board or the CXN bus
Call us, we will help you choose the right part or accessory.
+421 903 628 111Mon–Fri 8–16, also WhatsApp and ViberDescription
The Came SELT1BDG is a wall-mounted keypad that lets you open the gate without a hand transmitter. The code is evaluated by the control board to which the keypad is connected. A correct code is confirmed by a long beep and a green light. The housing is grey RAL 7024.
How many keypads you can connect
- R800 / S0002M – 2 with backlighting, 3 without backlighting (DIP 4).
- R800 V2 / S0002P – 4.
- S0001 / S0002 / S0004 – 2, only with backlighting switched off.
- CXN bus – up to 7 readers, each with its own address set with DIP switches 1–3.
What to bear in mind when wiring
- Cable – FROR 2 × 0.5 mm², no more than 30 m from the board (50 m on the CXN bus). Do not use a shielded cable.
- Power source – if the keypad is not powered by a Came control board, the power source must have a current limit of 1.5 A.
- Code – you enter a new code when storing a user in the control board and confirm it with #. You have less than 5 seconds for each digit.
- Protection – with S0002M/P and S0001/2/4 boards, the keypad locks for 1 minute after 5 incorrect codes.
The card is available as the Came R800, the decoder as the Came S0002P. The wireless version is the Came SELT1W4G. Send questions to eshop@saver.sk.
Specifications
| Dimensions | 70 × 73 × 35 mm (š × v × h) |
| Weight | 300 g |
| Protection rating | IP54 |
| Rated current draw | 40 mA |
| Max. power consumption | 0,6 W |
| Operating temperature | -20 až +55 °C |
