Came GARD LT6 barrier housing, passage up to 6.5 m, with encoder

The Came GARD LT6 is a road barrier for passages from 3 to 6.5 m wide, for example at the entrance to a site, a larger car park or a logistics yard. It replaces the GARD 6500, which is no longer made. This product is the housing alone, made of painted galvanised steel, with a 24 V DC motor with encoder, ZL392-C control board with display and balance springs. According to the Came manual it handles 160 cycles per hour and 3,500 cycles per day.

What to add

• Boom – the standard boom is the rectangular G0601, 100 × 40 mm, 6.85 m long. If you prefer not to assemble the parts, choose the LT6 barrier with boom. An alternative is the round G0602, Ø 100 mm, with the 803XA-0700 flange.
• Boom rest – the G02807 fixed rest or the 803XA-0330 swing rest.
• Safety and control – choose the flashing light, photocells, receiver card and transmitters in the complete delivery.

What to consider before installation

• Boom rest – for a passage wider than 4 m a boom rest is mandatory; the general instructions in the manual require it from 3 m.
• Springs – you do not choose them by boom length. Use the table in the manual to select the lever hole they hook into.
• Opening direction – it can be changed even after installation; the intermediate plate allows the boom to be fitted on the left or the right.
• Wind – the 6.8 m boom is rated for wind speeds up to 80 km/h. Do not leave it open for long in strong wind.

The housing has an IP54 protection rating, operating temperature −20 to +55 °C, weight 84 kg. We install the barrier in the Košice and Prešov regions, see the Installation page.