Came ATI30DGF operator kit for double-leaf gates, up to 6 m, 24 V

The Came ATI30DGF is a complete kit for automating a double swing gate with a total width of up to 6 m. It contains two irreversible 24 V DC linear operators with encoder, the Came ZLX24MA control unit in an enclosure, a pair of DIR10 photocells, a KRX1FXSW LED flashing light and a 4-channel TOP44RBN transmitter. A 3 m leaf can weigh up to 400 kg, shorter ones more (2 m up to 800 kg). The motor opens the leaf by 90° in 13 s.

Functions

• Stops in the operator – each motor has a mechanical stop for both opening and closing. If the gate has no ground stop, the leaf is stopped by the stop on the operator.
• Control unit – you set up the ZLX24MA via the display. It handles 20 cycles per hour and has a CXN BUS and a connector for CAME Key.
• Power cut – to run without mains power, the unit needs the Came RLB backup power card with batteries.

Before installation

• Electric lock – the manufacturer always recommends it; for leaves longer than 2.5 m it is mandatory. Choose from our locks and drop bolts.
• Installation dimensions – leave at least 200 mm between the piston and the ground.
• Environment – protection rating IP54, operation at −20 to +55 °C.

For less frequent opening there is the ATI-3000 kit for 230 V. We install the operator in the Košice and Prešov regions, see the Gate operators with installation page.