Nice Toona 4024 operator kit for double-leaf gates, up to 6 m, 24 V

Nice Toona 4024 is a set of two linear operators for double swing gates with a total width of up to 6 m, i.e. with leaves up to 3 m. The 24 V DC motors handle 95 cycles per hour, so they also suit entrances where the gate opens frequently. They are controlled by the MC824H unit powered from the 230 V AC mains.

Functions

• automatic learning of the leaf travel, slowdown points and partial opening,
• obstacle detection,
• photocells and control devices are connected with two wires via the BlueBus system,
• during a power cut, release the leaves with a key and open them manually.

Things to consider before installation

• Stops – in the open position, the leaf is stopped by an adjustable stop on the operator. In the closed position, the gate must have a centre stop.
• Leaf weight – the permitted weight decreases with the leaf length; compare it with the chart in the manual before installation.
• Environment – protection rating IP44, operation at −20 to +50 °C.
• Backup battery – the Nice PS324 slots into the MC824H unit.
• Larger gate – for a gate up to 10 m, choose Toona 5024.
• Replacement motor – a separate Toona 4024 motor with brackets, without a control unit.

We install the operator in the Košice and Prešov regions; see the Gate operators with installation page.