Came DLX30CIP photocells, flush-mounted, relay, range 30 m
- Pair of Came DLX flush-mounted outdoor photocells with relay output
- Range up to 30 m, can be reduced to 10 m with a jumper
- Power supply 12–24 V AC/DC, protection rating IP54, recessed 76 mm into the wall
Call us, we will help you choose the right part or accessory.
-
Power supply12–24 V AC/DC
-
Dimensions70 × 73 × 91 mm (76 mm into the wall)
-
Weight300 g
-
Protection ratingIP54
-
Rated current draw40 mA
-
Operating temperature-20 až +55 °C
-
Photocell rangedo 30 m
-
Photocell connection typeRelay (NC contact)
Description
Came DLX30CIP are safety photocells with a synchronised infrared beam for flush mounting in a wall or masonry pillar. Only the 70 × 73 mm front cover protrudes above the surface. When someone or something interrupts the beam, the operator stops or reverses the gate. They connect to the standard photocell input on the control unit.
Setting up
- Output – a jumper on the receiver selects an NC contact (safety, default) or NO.
- Range – a jumper on the transmitter sets 30 m (default) or 10 m.
- Multiple pairs – each pair gets its own address with DIP switches 1–3. From three pairs upwards, link the SY terminals on the transmitters; up to 8 pairs in total.
- Alignment – the LED on the receiver flashes 1 to 4 times per second; 4 flashes mean excellent alignment.
Things to consider before installation
The recess in the wall must be at least 76 mm deep. If the photocells are not powered by a Came control unit, the power supply must have a current limit of no more than 500 mA. The surface-mounted version is the Came DLX30CEP, the version for the CXN bus the Came DLX30SEP. Send questions to eshop@saver.sk.
Specifications
| Power supply | 12–24 V AC/DC |
| Dimensions | 70 × 73 × 91 mm (76 mm into the wall) |
| Weight | 300 g |
| Protection rating | IP54 |
| Rated current draw | 40 mA |
| Operating temperature | -20 až +55 °C |
| Photocell range | do 30 m |
| Photocell connection type | Relay (NC contact) |
