Nice ETPB transponder card reader, contactless, BlueBus

The Nice ETPB is a wall-mounted card reader next to the gate. Only someone whose card is stored in the memory can open the gate, garage door or door. It communicates with the control unit over the BlueBus, which also powers it. It does not need a decoder; cards are stored directly in the BM1000 memory in the reader.

Which operators it suits

The ETPB works only with a Nice control unit with BlueBus technology that supports control devices. Up to 4 ETPB readers or EDSB keypads can be connected to one control unit. Each device must have a different address set with a jumper.

Functions

• Two commands – factory set to step-by-step and partial opening. Each card can be stored for command 1, command 2 or both.
• Easy or Professional mode – chosen when storing the first card; they cannot be combined later.

Installation

Fix the reader to a vertical wall approximately 1.5 m above the ground. The wiring is parallel, with two non-polarised wires. After wiring, start the BlueBus device learning on the control unit. Cards are not included; Nice MOCARD cards are suitable. For operators without BlueBus, choose the Nice ETP. Send questions to eshop@saver.sk.