Nice EDS code keypad, wired, older type

The Nice EDS is a code keypad that lets you open a gate, garage door or door without a transmitter. You enter the code on buttons 0 to 9 and confirm with one of the two command buttons. The keypad does not evaluate the code itself. This is done by the decoder, which then switches its output and the operator receives a command.

What to buy in addition

• Decoder – the keypad works only with the Nice MORX decoder, which is not included. Codes are stored in its BM1000 memory, for 255 codes.
• More keypads – up to 4 EDS keypads can be connected to one MORX. Each must have a different address set with a jumper.

Things to consider during installation

• Wiring – the keypad and decoder are connected by 2 non-polarised wires. Up to 10 m a standard 2 × 0.5 mm² cable is sufficient, up to 30 m use a shielded one.
• Decoder – it has an IP30 protection rating and belongs in the control unit enclosure or another protected place.
• Buttons – where the MORX manual refers to the ◄ and ► buttons, use ▲ and ▼ on the EDS.

For operators with BlueBus, choose the Nice EDSB; for a wireless version, the radio Nice EDSWG. Send questions to eshop@saver.sk.