RollingCenter C-profile for cantilever sliding gates, galvanised, 70 × 60 mm, 6 m

The C-profile is welded or bolted to the bottom of the frame of a cantilever sliding gate. The load-bearing carriages anchored beside the opening run inside the profile, so the opening remains free of any track. The profile is galvanised.

Specifications according to the RollingCenter catalogue

• Profile – 70 × 60 mm, wall thickness 3.5 mm.
• Length – 6 m. The shorter piece is designated GIPI 4 RPZ 3 (3 m).
• Load capacity – with 2 CA 4 RPS carriages, a gate up to 450 kg and an opening of 3 to 6 m.

What else you need

• Carriages – 2 pieces of CA 4 RPS.
• Profile ends – 41 B support wheel, 50 B stop and 153/B end cap.
• Top guide – for example the 2RP small plate.

Things to consider when ordering

The profile must be as long as the whole gate including the counterbalance (30 % of the opening). With a 6 m opening, the gate is 8.6 m long. The complete assembly is included in the RollingCenter kit for openings up to 4 m. We are happy to help you choose at eshop@saver.sk.