Umakov C-profile for cantilever sliding gates, galvanised, 80 × 80 × 4 mm, 6 m

The C-profile forms the bottom load-bearing part of a cantilever sliding gate. It is welded or bolted to the bottom edge of the gate frame. The carriages anchored beside the opening run inside the profile, so there is no track in the passage. The profile is hot-dip galvanised.

Specifications for selection

• Profile – 78 × 78 mm, wall thickness 4 mm, slot 20 mm (designation 80 × 80).
• Length – 6000 mm. The same profile is also available in a length of 3000 mm.
• Weight – 48.8 kg.

What to bear in mind when ordering

• Profile length – the profile must be the length of the whole gate including the counterbalance section. For a longer gate, add a 3 m piece.
• Hardware – the carriages, end roller and stop must be for the 80 × 80 profile. The kit for cantilever gates up to 5 m contains the profile with hardware.
• Different profile – for a larger gate there is the kit with a 94 × 85 mm profile.

We can advise on choosing at eshop@saver.sk.