RollingCenter kit for cantilever sliding gates, 70 × 60 mm profile, clear passage up to 4 m

The RollingCenter kit is used to build a cantilever sliding gate with a clear passage of up to 4 m. The gate runs on two carriages anchored next to the opening, so the passage remains free of any track. The parts are galvanised.

Parts of the manufacturer's assembly

• CA 4 RPS carriage – 2 pieces, load-bearing carriage with 8 wheels.
• GIPI 4 RP/RPZ C-profile – 70 × 60 mm profile, length according to the gate.
• 41 B support wheel and 50 B stop – 2 pieces each. You can also buy the 41 B support wheel separately.
• Top guide – 2RP plate with rollers or 4RP.

Things to bear in mind before ordering

• Gate length – the counterbalance tail is 30 % of the clear passage; with a clear passage of 4 m, this is 1.2 m.
• Foundation – prepare the concrete foundation for the carriages and the cable routes according to the enclosed site preparation requirements.
• Larger clear passage – for up to 6 m and 600 kg, there is the kit with CA 4 RS carriages.

We will confirm the exact kit contents and profile length at eshop@saver.sk. You will find an operator for the gate in gate operators.