Nice HOPP HO7124 articulated arm operator for swing gates, up to 2.4 m, 24 V, with control unit

The Nice HOPP HO7124 is an irreversible operator with an articulated aluminium arm for swing gates with larger posts or a lighter construction. It takes up only 180 mm of width on the post, and the installation space must be at least 170 mm. Nice lists it as suitable for intensive use. It is the operator alone with its control unit – as a replacement for a damaged operator or the basis of your own set-up.

Control unit in the operator

• Self-learning – the unit learns the travel of the leaves, the slowdown and partial opening points, and recognises whether one or two motors are connected.
• BlueBus – photocells, for example the Nice Era EPMB, and control devices are connected with two wires, up to 12 units.
• Outputs – a flashing light, for example the Nice ELDC, and a 12 V electric lock up to 15 VA.
• Speed – 6 adjustable levels, programming with three buttons.
• Radio receiver – the plug-in Nice OXI-BD is inserted into the connector on the unit and is included in the HOPP kits.

Before installation

• Closing stop – the gate needs a mechanical stop in the closed position. The limit switch for opening is set on the underside of the operator.
• Two leaves – the second Nice HO7224 operator without electronics is powered from this operator.
• Power failure – the operator is released with a key; you can optionally connect a PS124 backup battery or the SYKCE solar kit.
• Smartphone control – via the Bus T4 interface with the Nice BiDi-WiFi module.
• Environment – operation at −20 to +55 °C, operator weight 9 kg.

Ready-made kits with photocells, flashing light and remote controls are the Nice HOPP for 1 leaf and Nice HOPP for 2 leaves. In the Košice and Prešov regions we install the operator; more on the page Gate operators with installation.