Nice Wingo 4000 operator kit for double-leaf gates, up to 4 m, 230 V

The Nice Wingo 4000 is a kit of two 230 V AC linear operators for double swing gates with a total width of up to 4 m. Each leaf can be up to 2 m wide. The recommended clear passage width is 3.5 m. 230 V AC motors are not suitable for heavy-duty use. They are controlled by the Nice MC800 control unit with a plug-in OXIBD bidirectional receiver.

Features

• the control unit controls both motors and is programmed with three buttons,
• automatic fault diagnostics,
• partial opening for pedestrians,
• programmable service reminder.

What to bear in mind before installation

• Stops – in the open position the leaf is stopped by an adjustable mechanical stop in the operator. In the closed position the gate must have a mechanical stop.
• Environment – protection rating IP44, operation at −20 to +50 °C.
• More frequent opening – choose the Wingo 2024 / 4024 on 24 V.
• Replacement motor – Wingo 4000 with brackets.

The kit with photocells is available as Wingo 4000 + Nice Era EPM photocells. In the Košice and Prešov regions we install the operator; more on the Gate operators with installation page.