Nice Wingo 3524/5024 operator kit for double-leaf gates, up to 7 m, 24 V

Nice Wingo 3524 / 5024 is a kit of two linear operators for double swing gates with a total width of up to 7 m, i.e. with leaves up to 3.5 m. It is the longest combination in the Wingo range that we offer. For smaller gates up to 4 m the Wingo 2024 / 4024 is sufficient. For a single swing gate there is the Wingo 3524 kit for 1 leaf.

Functions

• the MC424L control unit controls both motors so that the leaves move in the correct sequence,
• automatic learning of the end positions,
• slowdown when opening and closing,
• obstacle detection,
• Nice transmitters on 433.92 MHz; the kit includes 2 INTI2 remotes.

Things to consider before installation

• Stops – in the open position the leaf is stopped by a stop pre-fitted on the operator. In the closed position the gate must have a centre stop.
• Clear passage width – a maximum of 7 m; we recommend up to 5 m.
• Environment – IP44 protection rating, operation at −20 to +50 °C.
• Safety – with automatic closing we recommend photocells. The kit with them is available as Wingo 3524 / 5024 with EPM photocells.

If one operator fails, you can replace the separate Wingo 3524 motor.

In the Košice and Prešov regions we can also install the operator; more on the Gate operators with installation page.