Nice Wingo 2024/4024 operator kit for double-leaf gates, up to 4 m, 24 V, with Nice Era EPM photocells

This kit combines the Nice Wingo 2024 / 4024 operator for double swing gates with a pair of Nice Era EPM photocells. The gate can have an overall width of up to 4 m, i.e. leaves up to 2 m. The recommended clear passage width is 3.5 m. The 24 V DC motors are suitable for heavy-duty operation.

What is in the kit

• Two Wingo motors – with brackets and a stop for the open position, stroke 320 mm.
• MC424L control unit – with built-in receiver, automatic learning of end positions, slowdown and obstacle detection.
• EPM photocells – stop or reverse the gate when the beam is interrupted. They are required for automatic closing.

Before installation

• Gate stops – in the closed position the gate must have a centre gate stop.
• Installation – the operators are mounted on the pillar and the gate leaf, not in the ground.
• Environment – protection rating IP44, operation at −20 to +50 °C.
• Power failure – the Nice PS124 backup battery is sold separately.

For gates up to 7 m choose Wingo 3524 / 5024 with photocells. In the Košice and Prešov regions we install the operator; more on the page Gate operators with installation.