Umakov kit for cantilever sliding gates, clear passage up to 6 m, galvanised

The kit contains the bottom hardware for building a cantilever sliding gate. A cantilever gate does not run on a rail; it runs on roller carriages anchored next to the passage. The passage therefore stays free of rails and the gate also works in snow. The parts are galvanised; no further surface treatment is necessary.

Kit contents

• Support profile 94 × 85 × 5 mm – 1 piece of 6 m and 1 piece of 3 m. Weld or bolt the profile to the gate frame.
• Roller carriage – 2 pieces, height-adjustable. Anchor them in concrete, for example with the M16 × 250 anchoring kit.
• End roller – 1 piece.
• Bottom stop – 1 piece.
• Profile end cap – 1 piece.

What to bear in mind before ordering

• Gate weight – the manufacturer specifies the bottom guide of this kit for gates up to 325 kg.
• Top guide – holds the gate upright, for example the covered top guide with 2 rollers.
• Smaller passage – choose the kit up to 5 m or up to 4 m.
• Heavier gate – the RollingCenter kit up to 6 m is for gates up to 450 kg, the kit up to 8 m for gates up to 600 kg.

We can add to or adjust the kit on request; write to us at eshop@saver.sk. You will find an operator for the gate among our gate operators.