Hörmann UAP1 HCP universal adapter board

Hörmann UAP 1 HCP connects the door operator to almost any device. You can send commands to the operator from an external push-button or from a smart home system such as Loxone. The adapter also reports the door's end positions and can switch the garage lighting or a signal light.

Functions

• 6 inputs – open, close, partial opening, ventilation position, operator lighting, stop. They are controlled by potential-free contacts only; never connect voltage to the inputs.
• 3 potential-free outputs – outputs 1 and 2 report the door open and closed, output 3 is freely programmable. Switching capacity max. 30 V DC / 2.5 A or 250 V AC / 500 W (resistive load).

Which operators it suits

The UAP 1 HCP only works with Hörmann Series 4 operators. For older Series 2 and 3 operators with the HCP1 bus, choose the Hörmann UAP 1. If you want to control the door from your phone via Wi-Fi, see the Hörmann WLAN Gateway.

Connection

The pack contains a 2 m system cable, installation materials and a wiring diagram. The adapter is powered from the operator bus and needs no external power supply. Wiring may only be carried out by an electrician. After connecting it for the first time, scan the devices on the bus: on the ProMatic 4, set DIL switch 8 to ON and after a few seconds back to OFF; on the SupraMatic 4, select parameter 01 in menu 37 and confirm. Send any questions to eshop@saver.sk.