Nice MyGo4FM remote control, 4-channel, rolling code, 868 MHz

The Nice MyGO4FM is a four-button transmitter for Nice gate, garage door and barrier operators. Each button controls one device or one operator function. As supplied, it transmits the one-way O-Code rolling code at 868.46 MHz, which also lets you use the functions of the Nice Opera system. You can also programme it with the Nice Pro-View unit.

Transferring the code from an old transmitter

1. Hold the NEW and OLD transmitters next to each other.
2. On the NEW one, hold a button for about 3 seconds until the LED on the OLD one lights up. Release it; the LED on the old one starts flashing.
3. On the OLD one, hold a button until the LED on the NEW one lights up. Release it. When the LED on the new one goes out, the transfer is complete.

Then use the new transmitter near the operator at least once during its first 20 presses. Other storing methods are described in the receiver manual.

What to bear in mind

• Frequency – 868 MHz and 433.92 MHz are not interchangeable. Before ordering, check which frequency your receiver uses.
• Environment – protection rating IP30, temperature −5 to +55 °C. Indoors or outdoors under cover.
• Battery – when the LED flashes red while transmitting, replace the CR2430 battery.

The MyGO2FM has two buttons on 868 MHz; the 433.92 MHz version is the MyGO4. Send questions to eshop@saver.sk.