Nice MyGo2FM remote control, 2-channel, rolling code, 868 MHz

The Nice MyGO2FM is a two-button transmitter for Nice gate operators, garage door operators and barriers. Each button controls one device or one operator function. As supplied, it transmits a one-way O-Code rolling code on the 868.46 MHz frequency, which also lets you use the functions of the Nice Opera system. You can also program it with the Nice Pro-View device.

Transferring the code from an old transmitter

1. Hold the NEW and OLD transmitters next to each other.
2. On the NEW one, hold a button for about 3 seconds until the LED on the OLD one lights up. Release it; the LED on the old one starts flashing.
3. On the OLD one, hold a button until the LED on the NEW one lights up. Release it. When the LED on the new one goes out, the transfer is complete.

Then, during the first 20 presses, use the new transmitter near the operator at least once. Other memorisation methods are described in the receiver instructions.

What to bear in mind

• Frequency – 868 MHz and 433.92 MHz are not interchangeable. Before ordering, check which frequency your receiver operates on.
• Environment – IP30 protection rating, temperature −5 to +55 °C. Indoors or outdoors under a roof.

The MyGO4FM has four buttons on 868 MHz; the 433.92 MHz version is the MyGO2. Send questions to eshop@saver.sk.