Nice SUMO 2000 industrial door operator, up to 35 m², with control unit

This kit contains the Nice SUMO 2000 operator and the D-PRO 924 control unit in a wall-mounted enclosure with push-buttons. It is designed for balanced industrial sectional doors up to 35 m² with torsion springs above the door. The operator slides directly onto the spring shaft. The 24 V DC motor has an encoder, so there are no limit switches to adjust.

Features

• Performance – torque 120 Nm, power 500 W, duty cycle 50 %.
• Control – soft start and soft closing, obstacle detection.
• Release – directly on the operator or by a pull cord from the ground. For release from outside there is the Nice KA1 cable with the Nice KIOMINI lock.

Things to consider before installation

• Balance – you must be able to open the door by hand with a force of less than 300 N (30 kg).
• Shaft – the bore is 25.5 mm. For a thicker shaft, use the Nice CRA9 adapter.
• Radio – a receiver, for example Nice OXI BD, is not included.
• Power cut – the Nice PS224 battery can be connected in the D-PRO 924 enclosure.

If you already have a D-PRO 924 unit, the SUMO 2000 operator on its own is enough. For smaller doors up to 20 m² there is Nice SOON. Installation in the Košice and Prešov regions is described on the Authorised installation page.