Nice SUMO 2000 industrial door operator, up to 35 m², stand-alone

Nice SUMO 2000 is an operator for balanced industrial sectional doors up to 35 m² with torsion springs above the door. It slides directly onto the spring shaft. The 24 V DC motor has an encoder, so there are no limit switches to set. This product is the operator alone; for operation you need the Nice D-PRO 924 control unit.

Technical data for choosing

• Performance – torque 120 Nm, power 500 W, duty cycle 50%.
• Shaft – 25.5 mm bore; for a thicker shaft use the Nice CRA9 adapter.
• Release – directly on the operator or by a cable from the ground. For release from outside there is the Nice KA1 cable with the Nice KIOMINI lock.
• Protection rating – IP44.

What to bear in mind before installation

• Balancing – it must be possible to open the door by hand with a force of less than 300 N (30 kg), and it must stay put in any position.
• Complete kit – the operator with control unit in one pack is available as SUMO 2000 with control board.

The operator can also be used as a replacement for a damaged SUMO motor. Send compatibility questions to eshop@saver.sk. Installation in the Košice and Prešov regions can be found on the Authorised installation page.