The Tedee GO is fitted on the inside of the door without replacing the cylinder. You insert the key into the cylinder, attach the lock and tighten it with the Allen key supplied. You then unlock the door with the Tedee app or the button on the lock. A standard key still works from the outside.
What to bear in mind before installation
- Test your cylinder – the lock turns a key that stays inserted in the cylinder on the inside. So before buying, try this: insert a key from the inside and leave it there, then insert a second key from the outside. If you can unlock and lock the door from the outside, the cylinder is suitable (it has a so-called emergency function). If the key cannot be inserted or turned from the outside, the cylinder needs to be replaced.
- Cylinder protrusion – if the cylinder protrudes less than 3 mm, stick the adapter supplied around it.
- Environment – indoor use only, 10 to 40 °C.
Installation procedure
- Turn the key in the cylinder to the horizontal position.
- Attach the lock with the button facing up and tighten the three screws with the Allen key supplied.
- Pull out the protective battery films, then activate and calibrate the lock in the app.
Tedee GO2 or Tedee PRO?
| Tedee GO2 | Tedee PRO |
|---|
| Installation | on your existing cylinder without replacing it – fits onto the inserted key and is tightened with 3 screws | onto the shaft of a Tedee-ready cylinder or with the adapter for European cylinders (an additional key is notched) |
| Cylinder | with emergency function; a projection under 3 mm is solved by the adapter supplied | with adapter: emergency function and a projection of at least 2 mm |
| Power | 3 CR123 / CR123A batteries, you replace them yourself, battery life up to 8 months | built-in 3,000 mAh LiPo battery, charged by cable directly on the door, battery life 6 to 10 months |
| Dimensions | larger (GO: Ø 58 × 65 mm) | smaller and more discreet, Ø 45 × 55 mm |
| Torque | 1.6 Nm – handles multi-point locks too | not specified by the manufacturer |
| Remote control, smart home | the same for both via Tedee Bridge, unlocking by code or fingerprint with Tedee Keypad PRO |
| Environment | indoor use only, 10 to 40 °C |
How to choose: Tedee GO2 is the simplest and more affordable choice for your existing cylinder. Choose Tedee PRO if you want a smaller lock with charging instead of batteries, or if you are replacing the cylinder as well.
The Tedee Bridge enables remote control and voice assistants; with the Tedee Keypad PRO you can unlock without a phone. The newer model is the Tedee GO2. Send questions to eshop@saver.sk.
