RollingCenter wheel with bracket inside the frame, C45, 2 bearings, V groove, Ø 80 × 24 mm

The 822PSV wheel carries a tracked sliding gate. It is made of C45 steel, has two bearings and sits in a bracket that is inserted into the bottom profile of the gate. The wheel is thus partly recessed in the frame. The two bearings spread the load, so it carries more than a wheel of the same diameter with one bearing. According to the manufacturer's catalogue, the V groove is intended for the RollingCenter ANGULA track.

Specifications according to the RollingCenter catalogue

• Wheel – diameter 80 mm, width 24 mm, V groove with 96° angle.
• Bracket – length 140 mm, 2 holes Ø 9 mm at 117 mm centres.
• Load capacity – 280 kg per wheel.
• Finish – galvanised steel.

Things to consider when choosing

A gate needs at least 2 wheels and their total load capacity must exceed the weight of the gate. The same diameter with 1 bearing is 820PSV (190 kg); a larger wheel with 2 bearings is 922PSV. For a round-profile track there is 826PSO with O groove. A suitable track is the 3 m V track. We are happy to advise at eshop@saver.sk.