RollingCenter wheel with bracket inside the frame, C45, 2 bearings, O21 groove, Ø 120 × 26 mm

The 1227PSO wheel carries a tracked sliding gate. It is made of C45 steel, has two bearings and sits in a bracket that is inserted into the bottom profile of the gate. The O groove is round and, according to the manufacturer's catalogue, is intended for the RollingCenter NEWOMEGA, NEWOMEGA2, FLOOR, HEAVY, IBBI and SISTEMA tracks.

Specifications according to the RollingCenter catalogue

• Wheel – diameter 120 mm, 100 mm at the bottom of the groove, width 26 mm, O groove 21 mm.
• Bracket – length 185 mm, 2 holes Ø 9 mm at 151 mm centres.
• Load capacity – 430 kg per wheel.
• Finish – galvanised steel.

Things to consider when choosing

A gate needs at least 2 wheels and their total load capacity must exceed the weight of the gate. The bracket is longer than on the smaller wheels. Smaller wheels of this type are 926PSO Ø 90 mm and 1026PSO Ø 100 mm. For an even heavier gate there is the 16038IO wheel Ø 160 mm with a grease nipple. We are happy to help you choose at eshop@saver.sk.