Came V6 toothed rack, plastic-coated, steel core, module 4, 20 × 27 mm

The toothed rack is fixed to the sliding gate along its entire length. The operator pinion engages with the rack and moves the gate. The Came V6 rack has a nylon surface with a steel core and a tooth module of 4. It suits operators with a module 4 pinion.

Which operators

• Came BX – for example Came BXV04AGS or BX-78.
• Came BK – for gates up to 1,000 kg.

Installation

1. Release the operator and lay the rack on the pinion.
2. Screw or weld the rack to the gate along its entire length. For screwing, there is a set with self-drilling screws and washers.
3. Support the joint between two pieces with a short piece of rack and secure it with two clamps.
4. Set the play between the pinion and the rack with the operator's feet, and only then fix the operator firmly.

The BX/BK end stops are fixed to the rack. The Came CGZP rack has the same cross-section and module. We install the gate with the operator in the Košice and Prešov regions; see the Gate operators with installation page.