Hörmann pillar angle bracket for RotaMatic

The angle bracket is a special Hörmann fitting for RotaMatic operators. Use it when the pivot axis of the leaf is more than 150 mm from the edge of the pillar, or more than 210 mm with RotaMatic PL. Hörmann refers to this as dimension e. The bracket shortens the distance between the operator pivot point and the pillar, so the operator does not hit the corner of the pillar and the leaf opens by at least 90°.

Installation

• Fixing to the pillar – with 4 screws and anchors. For masonry pillars, Hörmann recommends the pillar plate for masonry.
• Holes for the operator – depending on the hole selected, dimension A changes from e + 120 mm through e + 100 mm to e + 80 mm. When using the hole closest to the pillar, shorten the bracket.
• Standard fitting – installation also requires the fitting part supplied with the RotaMatic operator.

Related

• VP 1 extension plate, for when the distance needs to be increased instead,
• the RotaMatic 2 or RotaMatic PL 2 operator.

We can advise on installation dimensions at eshop@saver.sk. In the Košice and Prešov regions we can also install the operator; more on the Gate operators with installation page.