Came ATS50AGS operator kit for single-leaf gates, up to 5 m, 230 V

Came ATS50AGS is an irreversible telescopic operator for single swing gates with a leaf up to 5 m and a weight of up to 400 kg. The telescopic arm adapts to the depth of the post, so the operator is also suitable where the gate hinge is recessed up to 200 mm from the face of the post. The 250 W motor opens the leaf in 20 s.

Functions

• End positions – the motor has microswitches for both the open and closed positions, set with adjusting screws under the cap. Came recommends mechanical stops on the ground; use the microswitches where there are no stops.
• Power failure – release the motor with the key and open the gate by hand.

What to bear in mind when choosing

• Duty cycle – the 230 V AC motor handles 20 cycles per hour and is not designed for heavy-duty operation. For frequent opening choose a 24 V operator, for example the Came ATI-5024.
• Lock – for leaves longer than 2.5 m an electric lock is mandatory according to the Came manual. The ZA3P control unit powers a 12 V lock.
• Environment – IP54 protection rating, operation at −20 to +55 °C.
• Two leaves – choose the ATS50AGS for double swing gates.

We install the operator in the Košice and Prešov regions; see the Gate operators with installation page.