Came EDGL25R1 sensitive safety edge for gates, 8K2, profile 44 × 99 mm, 2.5 m

Came EDGL25R1 is a safety edge from the EDG series with a 44 × 99 mm profile. It is mounted on the closing or opening edge of the gate. When the gate hits an obstacle, the edge changes its resistance and the control unit stops the gate or reverses it to open. The edge is resistive with a resistance of 8.2 kΩ, so the control unit also monitors for a broken or short-circuited cable.

Installation

• Length – 2500 mm. Came states that the edge can be shortened with the special 806ED-0171 shears.
• Fixing – the edge slides into the 806ED-0163 aluminium profile (2 m), which is screwed to the gate.
• Cable – connect it to the control unit with the 806ED-0169 connection cable.

Connection

• 8K2 input – directly to control units with an input for a resistive edge, for example Came ZLX24MA.
• Without an 8K2 input – via the Came ECN3F242 evaluation unit (cat. 3, PL e).
• Wireless – via the Came RIO 2.0 system.

If you are unsure about the profile height or the wiring, write to us at eshop@saver.sk.