Hörmann RE 1 external receiver, 1-channel, rolling code, 433 MHz

Hörmann RE 1 is a simple receiver for older Hörmann 433 MHz rolling-code transmitters, for example RSC 2, RSZ 1 or RSE 2. Connect it to a suitable Hörmann operator with a 24 V DC supply and a push-button input switched to 0 V. It does not control functions such as lighting or partial opening. The connection cable is 0.5 m long.

Wiring

• Green wire – to 0 V.
• White wire – to the impulse or direction push-button input.
• Brown wire – to +24 V from the control.

The output can handle a maximum of 50 mA. If you are not sure whether the operator supports this type of connection, use a receiver with a relay output.

Learning a transmitter

1. Briefly press the red P button. The LED flashes slowly for 20 s.
2. Press the transmitter button. The LED starts flashing quickly; release the button.
3. Within 15 s, press the same button again. After very rapid flashing the LED goes out and the code is stored.

When a seventh transmitter is learned, the oldest one is deleted without warning. Delete all codes by holding the P button for at least 5 s. Other types can be found in the receivers category; for the RSC 2 transmitter there is a transmitter holder. Wiring can be ordered through our service; send your questions to eshop@saver.sk.