Hörmann HET 24 external receiver, 2-channel, fixed code, 868 MHz

Use the Hörmann HET 24 if you have Hörmann transmitters with 868 MHz fixed code and want to use them to control an operator without a suitable receiver. It suits Hörmann operators as well as operators from other manufacturers with a push-button input. The two channels control two functions, for example gate travel and partial opening.

Which transmitters

• 868 MHz fixed code – grey Hörmann transmitters with blue buttons or with a type designation ending in 868, for example HSE 2 868 MHz.
• BiSecur – a transmitter such as the HSD 2 BS can be switched to 868 MHz fixed code, but it then transmits only the fixed code. For BiSecur, choose the HET/S 24 BS.

Learning a transmitter

1. Press button P 1× for channel 1 or 2× for channel 2. The LED flashes.
2. Within 20 s, press and hold the transmitter button.
3. When the LED changes its flashing, the code is stored.

Only connect the receiver with the power off. It is powered by 12–24 V AC/DC (max. 50 mA), for example from the 24 V output on the operator or from a MEAN WELL LPV-20-24 power supply. Do not connect it to the 230 V mains. Supplied without a receiver is, for example, the RotaMatic control unit in an enclosure for operators up to 02/2017. You can order wiring in the Košice and Prešov regions through our service. Other transmitters can be connected via the universal 433/868 MHz receiver. Send any questions to eshop@saver.sk.