Hörmann FES 1-1 BS radio socket, BiSecur, 868 MHz

Plug the Hörmann FES 1-1 BS into a standard 230 V socket and plug an appliance, such as a lamp, into it. You control it with a BiSecur hand transmitter, an internal push-button or the app. Using the supplied cable, you can also connect it to a gate operator and control it by impulse. Before buying, check that your operator can be controlled by impulse.

Channel functions

• Channel 1 – alternately on and off.
• Channel 2 – on only, channel 3 – off only.
• Channel 4 – impulse for the gate operator, without status feedback.

Teaching a transmitter

1. Press button P 1× to 4× depending on the channel.
2. Within 25 s, switch the transmitter to code transfer mode.
3. When the LED flashes rapidly blue and goes out, the code is stored.

You can store a maximum of 100 codes. With the HS 5 BS transmitter you can see whether the appliance is switched on. The socket handles inductive loads up to 500 W, the impulse output 24 V and 110 mA, and the cable to the operator can be a maximum of 30 m long. A kit with a socket without impulse output and a transmitter is the HF 51 BS. Send any questions to eshop@saver.sk.