Sleeve anchor with M10 × 135 mm bolt, 12 × 130 mm

The sleeve anchor is inserted into a drilled hole. When the bolt is tightened, the sleeve expands and the anchor locks firmly in the material. It is designed for concrete and solid materials.

Specifications

• Anchor – diameter 12 mm, length 130 mm.
• Bolt – M10 × 135 mm, fully threaded, with round washer.
• Finish – electro-galvanised steel.

Procedure

1. Drill a hole for the anchor in the concrete and clean out the dust.
2. Insert the anchor through the hole in the part being anchored, up to the washer.
3. Tighten the bolt until the sleeve expands and the part sits firmly.

What it is used for

• Stops and barriers – for example a rubber ramp stop.
• Hollow materials – for hollow bricks, a chemical anchor is more suitable.
• Operator and barrier – for anchoring an operator there is the operator anchoring kit.

We can advise on choosing the anchoring at eshop@saver.sk.