Came T434 remote control, 4-channel, fixed code, 433 MHz

The Came T434 is an older type of four-button fixed-code transmitter for Came systems. Each button can have its own code and its own channel, so you can control up to four devices. Transmission is confirmed by an LED and an audible signal. The manufacturer states a range of 50 to 200 m, a 12 V battery power supply and dimensions of 45 × 92 × 15 mm.

Coding a button manually

1. Fit the jumper on the strip inside the transmitter (position A).
2. Press the button you want to code.
3. Using buttons P1 (ON) and P2 (OFF), enter the 20-bit code and then the 4-bit channel code according to the table in the instructions.
4. Remove the jumper (position B).

Repeat the procedure for each button. Write the code in the grid in the instructions so you can easily enter it again on another transmitter.

Things to bear in mind

• System code – the new transmitter must have the same code as the receiver. If you do not know it, write to us at eshop@saver.sk.
• Other brands – with an external receiver you can also control devices from other manufacturers.
• For the car – for Came fixed code there is also the Proxima Came Top/Tam.

More transmitters can be found in the hand transmitters category.