Hörmann top guide roller with holder, track application Z, left-hand

The top holder with roller guides the top section of the door in the upper guide track. It is supplied as a unit, so you replace the roller and holder at once. The part goes on the left-hand side of the door as seen from inside the garage. A worn or damaged roller makes the door run stiffly or jam.

Which doors

• Series 40 – Hörmann sectional doors with track application Z or BZ (tension springs at the sides of the door), manufactured from 1999.
• Track application N – with torsion springs above the door, the top roller has a different holder; order the roller with holder for track application N.

Things to consider

• Both sides – if one roller is worn, the other usually is too. Also order the right-hand roller with holder.
• Axle length – separate Hörmann rollers have a 40, 50 or 110 mm axle. The middle sections take a roller with a 40 mm axle; the bottom section has its own bottom roller holder.

We will carry out the replacement in the Košice and Prešov regions; see the Service page.