Hörmann bottom hinge, track application N, L, H, right-hand

The bottom hinge is fitted at the bottom on the right-hand side of the bottom door panel, viewed from the inside. It serves as the mounting for the lowest guide roller holder and secures the thimble of the wire rope from the torsion springs. It is intended for Hörmann Series 40 sectional doors, for example LPU 40 and LTE 40, with track application N, L, H or BL, manufactured from 1/6/1999. Check the part regularly for corrosion or damage.

Installation

• Fixing – with Hörmann hexagon self-tapping screws with serrated flange A 6.5 × 16 mm.
• Roller – with track application N, the bottom holder takes the bottom panel roller with 50 mm axle.
• Other side – the left-hand bottom hinge is a separate part.

Safety

The cable attached at the bottom hinge is tensioned by the force of the torsion springs. Before removal, the springs must be relieved and the door secured, otherwise there is a risk of injury. When replacing, also check the wire rope for track application N. We will carry out the replacement in the Košice and Prešov regions; more on the Service page.